Mold Prevention Tips

  • By 7016413042
  • 21 Feb, 2019

Helpful Tips to Prevent Mold 

Yes, mold can be good — it's essential in making brie and penicillin, for example, and necessary for the decomposition of organic matter in nature — but it can also be very, very bad, especially when it grows undetected in your home.

Mold spores spread easily and cannot be completely eradicated.

Mold can grow anywhere: on carpet, clothing, food, paper, and even in places you can't see, such as the backside of drywall, areas inside walls around leaking or condensing pipes, and above ceiling tiles.

Not only is a mold problem difficult and costly to fix, but mold can also produce allergens and irritants (and, rarely, toxins) that may compromise your health.

So what can you do if you're concerned about mold growing in your home?

The best approach is preventing mold before it becomes a problem. The key to mold prevention is simple: moisture control.

Here are nine ways to curb moisture indoors, and the mold that thrives on it.

1. Identify problem areas in your home and correct them. You can't mold-proof your home, but you can make it mold-resistant. Do an audit of your home: where are the problem areas? Does the basement flood? Do you notice frequent condensation on an upstairs window? Is there a water stain on the ceiling from a persistent leak? Preventing mold from growing or spreading might be as simple as ripping up carpet in a damp basement, installing mold-resistant products, or repairing damaged gutters. Or it may be a matter of major excavation and waterproofing. Whatever the case, address the problem now. It might cost some money up front, but it will surely be more costly down the road if mold continues to grow unchecked.

2. Dry wet areas immediately. Mold can't grow without moisture, so tackle wet areas right away. Seepage into the basement after a heavy rainfall, accumulation from a leaky pipe, even a spill on the carpet should be dried within 24 to 48 hours. If you've experienced a flood, remove water-damaged carpets, bedding, and furniture if they can't be completely dried. Even everyday occurrences need attention: don't leave wet items lying around the house, and make sure to dry the floor and walls after a shower. Don't leave wet clothes in the washing machine, where mold can spread quickly. Hang them to dry — preferably outside or in areas with good air circulation.

3. Prevent moisture with proper ventilation. It may be that your routine domestic activities are encouraging the growth of mold in your home. Make sure an activity as simple as cooking dinner, taking a shower, or doing a load of laundry doesn't invite mold by providing proper ventilation in your bathroom, kitchen, laundry room, and any other high-moisture area. Vent appliances that produce moisture — clothes dryers, stoves — to the outside (not the attic). Use AC units and dehumidifiers (especially in humid climates), but make sure they don’t produce moisture themselves by checking them periodically and cleaning them as directed by the manufacturer. Your energy-efficient home may be holding moisture inside, so open a window when cooking or washing dishes or showering, or run an exhaust fan.

4. Equip your home with mold-resistant products. Building a new home or renovating an old one? Use mold-resistant products like mold-resistant drywall or mold-resistant Sheetrock, and mold inhibitors for paints. Traditional drywall is composed of a gypsum plaster core pressed between plies of paper. Mold-resistant drywall is paperless — the gypsum core is covered in fiberglass, making the surface highly water-resistant. Moisture-resistant drywall is especially valuable in areas prone to wetness, such as bathrooms, laundry rooms, basements, and kitchens. Not only is traditional drywall more susceptible to mold than the paperless kind, but it is also difficult to rid of mold, and removal and replacement can be expensive. Mold-resistant gypsum board is also available; the core of the drywall is developed in such a way to prevent moisture absorption, and thus prevent mold growth.

 

5. Monitor humidity indoors. The EPA recommends keeping indoor humidity between 30 and 60 percent. You can measure humidity with a moisture meter purchased from your local hardware store. You'll also be able to detect high humidity by simply paying attention to potential problem areas in your home. Telltale signs of excessive humidity include condensation on windows, pipes, and walls. If you notice condensation, dry the surface immediately and address the source of moisture (for example, turn off a humidifier if water appears on the inside of nearby windows).

6. Direct water away from your home. If the ground around your home isn't sufficiently sloped away from the foundation, water may collect there and seep into your crawlspace or basement.

7. Clean or repair roof gutters. A mold problem might be a simple matter of a roof that is leaking because of full or damaged gutters. Have your roof gutters cleaned regularly and inspected for damage. Repair them as necessary, and keep an eye out for water stains after storms that may indicate a leak.

8. Improve air flow in your home. According to the EPA, as temperatures drop, the air is able to hold less moisture. Without good air flow in your home, that excess moisture may appear on your walls, windows and floors. To increase circulation, open doors between rooms, move furniture away from walls, and open doors to closets that may be colder than the rooms they’re in. Let fresh air in to reduce moisture and keep mold at bay.

9. Keep mold off household plants. They're beautiful and help keep your indoor air clean — and mold loves them. The moist soil in indoor plants is a perfect breeding ground for mold, which may then spread to other areas of your house. Instead of getting rid of your plants, try adding a bit of Taheebo tea to the water you give to your houseplants. The oil of this tree, which withstands fungi even in rain forests, helps hinder mold growth in plant soil and can be found at natural food stores.

Finally, educate yourself on your region's climate — be it the cold and wet Northeast, the hot and wet South, the hot and dry Southwest, or the cold and dry West — and how it responds to moisture. There is no one-size-fits-all solution when it comes to mold prevention. Knowing what works for your climate and your home is an important first step.

For more info on mold prevention, check out this article from Mother Nature Network: Moisture-resistant building products

MNN homepage photo: mattimattila/Flickr
referenced by:  https://www.mnn.com/your-home/at-home/stories/how-to-prevent-mold-9-tips

Share

By 7016413042 April 13, 2024
Window Well Repair and Replacements
By 7016413042 May 13, 2022
Basement Waterproofing and Prevention is key to keeping your basement dry during the spring.  

Yearly Inspections:  Many people do not go into their basements regularly.  If you are not able to go in the basement  you should have it inspected once a year for any issues in the foundation.  As the earth shifts and moves it can cause cracks and breaks in your basement foundation.  You can do a Foundation Crack Repair process if the walls are concrete poured, this will prevent any water seeping in through the wall of your basement. 
Window Wells and Windows are a common seepage issue in basements as well.  A window well is not designed well to withhold a lot of pressure of water on the outside of the window.  Replacement of old windows in the basement will help prevent seepage through the basement windows.  There are also many other solutions that can help elevate the pressure of water on the outside.  Every few years you should "dig out" your window wells.  On the inside of your window well you can take a post hold digger and dig about one foot to 18" down.  You fill the window well up with fresh pea gravel you can get at Menards, Home Depot, or a any store similar.  You can put at least 3 or 4 bags of fresh pea gravel in the window well.  This will help disburse the water away from the window, helping water to properly drain into the ground.  
Sump Pumps - If you are getting water in your basement you may be in need of a sump pump.  This will collect water and pump it away from the foundation of your home.  If you get a lot of water in your  basement then you may also require a Drain Tile System.
Drain Tile System:  We install drain tile on the interior of your basement perimeter.  This is 3" tubing that will be installed and will drain into your sump pump and then our of the home.  Drain tile will collect the water before putting pressure on your foundation, diverting the water to your sump pump, and then pumped out away from the home.  Signs that you may need a Drain Tile system is if you are getting water where the floor meets the wall, cracks in the foundation floor, or if you have puddling in your basement in various places of the basement. 
Flood Pros Can give you FREE Estimates on all these services as well.

IF YOUR BASEMENT FLOODS: 
First, call a plumbing or water damage restoration specialist  to schedule the next possible appointment. There are many companies to choose from that offer basement flood cleanup services. You should call a professional for immediate help.  

Then call your insurance company to determine what is covered  under your current plan and what you are liable for.
If the source of the flood is due to the backup of city sewer lines, then you should call and report the issue to your city or municipality.

 You want to dry out the basement as soon as possible. When wet basements just have puddles of water spread around the room, you can use a wet vacuum to begin the cleanup and water removal process. You may need a pool pump, sump pump or a basic mop and bucket.

Since basements are not well ventilated by nature, it is also good to bring in dehumidifiers and fans during the drying period. This tip can prevent mold and rot, which could save you a lot of money or from health issues down the road.

Another tip is to remove any porous materials like fabrics to air out in a better ventilated area. If materials are wet for too long, then mold can begin to grow on them. This process can happen in as little as two days.

 

When mold grows on porous materials, they will likely have to be thrown away. Wet drywall will also probably need to be replaced since mold can be growing behind it, which can cause health problems for people nearby.

DETERMINE WHAT CAN BE SAVED AND WHAT IS TRASH

  • Throw away your materials that have been water damaged or contaminated with unclean water or mold.
  • Inspect all of the wood and drywall in the basement to ensure it is still in good condition. If it is not, then you may need to pay someone to replace them.
  • If materials have a mildewy smell but are still salvageable, then take these items to get professionally cleane

WATER IN BASEMENT: POTENTIAL CAUSES

When basement flooding affects your home, using your leak detection skills and finding the water source is the first key step.

Sometimes the cause will be obvious because flooding occurs after a large storm, but sometimes the flooding will pop up out of nowhere and lead you to a pipe problem or foundation crack you previously did not know existed.

This guide will help you navigate the many scenarios in which you may experience a wet basement.

Ref:   https://www.basementguides.com/flooding/





By 7016413042 February 28, 2022
April showers bring May flowers — Before you plan springtime celebrations prepare your home for water problems, potential springtime hazards and needed home improvement projects.
By 7016413042 January 25, 2022
Window Well Repair and Replacements
By 7016413042 November 19, 2021
Toilets :  If your toilet is leaking turn off the water valve and contact your plumber.  If there is a lot of water call a restoration company to extract any standing water or to dry any wet structures.  If structures are not properly dried out it could cause permanent damage to hour home or place.
Garbage Disposal:   If you wouldn't eat it, it should not be put in the garbage disposal.  Also, run cold water while the disposal is in use.  
When in doubt throw it in the trash.   If the garbage disposal is not working, turn off the switch, and check for jammed items.  Push and hold the "Reset" button located under the sink on the garbage disposal for 10 seconds.  
Dishwasher:   Rinse your dishes!  Use only dishwasher detergent to avoid damage and a mess!  Do not overload your dishwasher.  The tub and strainer should be periodically cleaned and checked for foreign objects.
A/C & HEAT:   Don't change the thermostat temperature more than 5 degrees at a time.  Keep windows, blinds, and doors closed to conserve energy.  Keep windows, blinds, and doors closed to conserve energy.  Close vents in rooms that are less frequently used .  If ice forms on the interior or exterior coils of your air conditioner, turn the unit off and call a HVAC company.  Keep the temperature setting above 67 degrees to help avoid frozen pipes.  An initial smoke smell is normal when turning on a heater for the first time, but if the smell lingers for more than 10 minutes, turn the unit off and HVAC Company.  
Gas Smell:  If you smell gas, open a window, exit the unit and contact a gas company immediately.
Electrical Problems:  If experiencing any arch or spark from a receptacle, do not attempt to operate.  Contact an electrician.  If power is completely out in your apartment contact the power company.
Run Your Fan:   Run you exhaust fan when taking a shower!  This helps eliminate moisture and lessen mildew.
Insects:   Insects such as ants, flies, or spiders are noticed, purchase and use common household bug sprays and traps.  If insects such as cockroaches, water bugs, or mites are noticed, please call address them immediately.    Keep all floors and counters clean.  Do not leave food out.  Do not leave doors open.  
Washer & Dryers:   Do not overload the washer with large items like blankets/comforters or oversized loads of clothing.  Clean dryer lint traps after every load of laundry.  
Light Bulbs: Residents are responsible for replacing all light bulbs in their apartments and garages.  Please note, speciality bulbs such as 4 foot fluorescent tube lighting do require specific disposal practices. 

 SOMETIMES IT IS BEST TO LEAVE WORK UP TO THE PROS!!!
In cases of no hot water, water leak, no heat or smell of gas, if these issues occur it is best to call a professional.

Some tips are in reference to:  Maintenance Tips for Rental Properties:  MPM Madison Property Management INC.



By 7016413042 September 3, 2021
Beautiful, Vibrant Fall— rustling leaves, fall festivals, corn mazes, Jack-o-lanterns, Halloween, bonfires, apple cider, roasting marshmallows, and Thanksgiving. While enjoying all the wonderful sights and smells of fall, it’s time to prepare your home for the colder weather ahead.

  Fertilize the lawn - Applying fall lawn fertilizer will help prevent winter damage and spring weeds. Ask a local garden center or check online to find out which type of fertilizer is best for your lawn’s needs and when to apply it.
 Gather round the hearth - If you have a wood burning fireplace and use it often, creosote a flammable by-product of burning wood accumulates in the flue or chimney, potentially resulting in a devastating fire. Have your chimney cleaned and inspected by a professional.
Seal concrete surfaces, driveways, sidewalks and patios - Reduce the penetration of undesirable materials, such as water or chlorides. Protect your expensive concrete surfaces from salt, de-icers, shoveling and moisture. Consult your local Concrete Repair Contractor for the best concrete sealing solution.
Give your furnace a physical - Once a year, it’s a good idea to have your heating system inspected by a professional. To avoid the last-minute rush, consider scheduling this task in early fall, before the heating season begins.
Get winter equipment ready - Service your snow blower and make sure it is ready to go, especially if you live in an unpredictable climate.
Clean gutter s - Once the majority of the autumn leaves have fallen, clear out those gutters and downspouts. Clogged gutters can lead to pooling water causing leaks and ice dams resulting in damaged roofing, siding and wood trim.
Have fun and enjoy the beautiful fall weather - If you have a fire pit, give it a good cleaning and fill it with lots of well-seasoned hardwood for those weekend marshmallow roasts and ghost stories [ Halloween will be here before you know it.
Credit BHG and HGTV 
By 7016413042 July 5, 2021

Exterior:   DIVERT WATER AWAY FROM THE FOUNDATION OF YOUR HOME

·        Clean all your gutters and downspouts regularly. When this system is not flowing properly away from your home, they will run over the gutter to the side of your home putting water pressure on your foundation.

·        Gutter Extensions. The farther away you can divert water from your basement foundation the better.  Did you know that Flood Pros installs underground gutter extensions? This does look a lot nicer on your property and you do not have to try to walk over the gutter extensions or around them. Let us take a look!

·        Clean out Window Wells. Did you know Flood Pros does a lot of window well repair? Window Wells are a common problem. In time they need replacement and maintenance, we would be happy to assist you or your clients.

·        Do yearly inspections on your roof. Replace any shingles that may be missing, loose, or damaged. This will prevent leaks.  

Interior:  

·        Basement Inspections: Do a walk through your basement look for any water marks, leaking areas, window well leaking, and also check your plumbing lines for leaks. The more proactive you are in fixing small issues may prevent a big issue down the road.   Most insurance policies do not cover any seepage issues in the home. You are responsible as a homeowner, to do the maintenance in your basment. Flood Pros will give a free waterproofing inspection, if you own the home, helping you to troubleshoot and solve any water issues you may detect in the basment.

·        Sump Pumps: Make sure they are operational and are large enough for your basement or home. We also recommend a battery backup sump pump system, in the event of a storm or power loss your sump pump will still be able to pump out ground water.

·        Clean out your Dryer Vents: This should be done every year, there are many house fires that occur as a result of a clogged dryer vent. You can clean out your dryer vent with a leaf blower from the inside out. If you need help or would like us to help you clean that vent you can call and schedule that with one of our Advantage Kwik-Dry Technicians.

·        Air Duct Cleaning: A clean HVAC system is happier and works harder!! HVAC system will have less stress and flow smoother when it is clean. There is a lot of debris and dirt that goes through your vents that will accumulate quickly. We recommend a yearly cleaning of your Air Duct System. Advantage Kwik-Dry will be happy to service your Air Ducts please call to schedule.

 

                                 

By 7016413042 March 15, 2021
Water damage can be incredibly destructive to your home.  A few preventative steps can help you avoid unwelcome surprises, damage, and expense.  "people going away on vacation, whether for days or months, should turn off the water to their whole house, says Chris Picot, vice president of Flood Pros, 11137 Bertram Road in Machesney Park.  "People don't always think to do that, but it only takes a couple hours to cause thousands of dollars worth damage because of water."
Frozen pipes, worn-out appliances, and leaks or breaks in water lines, roofs and windows can all lead to water damage.  Picot also suggests having a plumber change out water supply lines from plastic ones to rubber hoses encased in braided stainless steel, which prevents flexing.   Plastic ice maker water lines can be changed to copper.  Copper water lines leading to the outside in unheated areas of the home should be shut off in the winter.  Water lines in exterior walls should be well insulated.  Flood Pros has been in business since 1992 and works around the clock to respond to water problems quickly.   A water damage specialist explains to customers the process of water damage restoration and helps with processing an insurance claim, if needed.  
The company has state of the are equipment such as thermal imaging cameras and moisture meters to determine the source of water damage.  It also uses high-powered dehumidifiers and large air movers to reduce drying time to three days or less, in most cases.  By recording data on each damage area, Flood Pros can determine what progress is being made.  Totally drying an area eliminates mold or other pathogenic growths from developing.  For more information call our office at 815-398-2379 or WI area 608-756-9300.

By Peggy Werner, Smart living weekly

By 7016413042 December 22, 2020
Written by Rebecca Edwards  | Updated January 28, 2020
Ref By:   https://www.safewise.com/blog/safety-guide-winter/
By 7016413042 November 23, 2020

Comprehensive, Customized Solutions

Flood Pros Disaster Restoration Services will follow our tried and true method of handling mold damage.
  • Examination:  We will speak to you and perform an on-site examination to determine the amount of mold and where it is occurring. We can then determine a plan of action for mold remediation.  
  • Testing:  Flood pros can perform air quality testing to determine the amounts and types of mold present. Air Quality Testing
  • Protect: Unaffected content and structure will be removed from the work zone and or covered with plastic to prevent cross-contamination.  
  • Contain :  We will utilize our techniques to contain the mold to prevent its growth.
  • Remove :  Technicians determine what materials are restorable and will remove whatever structure of content is not. This may also include disposing of any affected materials from your property such as carpeting, drywall, etc.
  • HEPA:  Remaining surfaces are vacuumed using hepa filtration to remove remaining mold spores.
  • Clean :  We will thoroughly clean and sanitize the affected area and items which can be restored using both antimicrobial and mold stain removers. This process will help to remove any odors.
  • Restore : Structural materials may be treated with an encapsulate to stop the spreading of mold spores. We will handle any additional repairs needed to get your property back in order after our remediation process.


Published by: Jenny Bogie 
General Manager 
Flood Pros Restoration 
Show More
Share by: